>>> VHF/UHF AMPLIFIER, HUA33 <<<

Shown below  (Figure 1 & 2) is a broad-band amplifier that uses the MWA33 printed circuit assembly to produce 19 +/- 3 dB gain from 100 MHZ to 2.0 GHz.  See MWA33, for gain and output power plots.  DC power (12 V, 35 mA) is  brought in through the housing wall with an insulated #22 stranded wire. At the point where the DC power lead makes contact with the circuit board, a 1000pF SMD capacitor is used to attenuate RF/MW on the power lead.

Figure 1, HUA33 Complete Assembly

A U.S. SHIP TO ADDRESS IS REQUIRED

===

Figure 2, HUA33 Inside View

===

AZD HOME PAGE