>>> VHF/UHF AMPLIFIER, P/N MWA32A <<<

Shown below  (Figure 1 and 2) is a broad-band amplifier that uses the Mini-Circuits ERA-3SM MMIC, the Mini-Circuits ADCH-80 broadband RF choke,  and ceramic surface mount capacitors to produce approximately 19 +/- 3 dB gain from 100 MHZ to 1.0 GHz (see Figure 3 for gain plot).  Figure 4 shows output power at the 1 dB gain compression point for 500 MHz.  Figure 5 gives information on component type/location and connections.  The DC power required is 12 Volts, 35 mA.

Figure 1

FOR ONLINE ORDERING, A U.S. SHIP TO ADDRESS IS REQUIRED.  INTERNATIONAL ORDERING INFORMATION IS AVAILABLE BY CLICKING ON THIS HYPERLINK, INTERNATIONAL

Figure 2

===

Figure 3, Gain Plot

===

Figure 4, Gain Compression Plot

===

Figure 5, Components and Connections

===

VHF/UHF AMPLIFIER PAGE

===

AZD HOME PAGE